Waste Oil Burners After The Heating Season

Is it time to sit back and do nothing? NO. Your waste oil burner worked all heating season and now it is on a multi-month temporary retirement. There are service matters that can be done now to save you grief later. Did you flush your pump and burner out with diesel fuel and then cut off the power to the burner? Flushing gets the waste oil out that could deposit sediments in the lines and burner during the off-season. If power is left on the burner it will continue to preheat oil and accelerate the sediments to form as sludge in the lines. Without this preventative service you can expect nozzle plugs, and solenoids to stick in the Fall. Filters, valves, and tanks should be serviced now too. Firelake dealers are skilled to do this work and keep your troubles to a minimum. At www.firelakeheaters.com click on the Dealer Locator tab or contact Firelake directly to get the process started 866-252-3757.

Independent HVAC Dealer Speaks Mind

In the waste oil heating industry feedback from the people working on the equipment is very important. When those same people contact you and comment,

“…. and we have been in the HVAC industry for over 30 years. We service a five state area, NE IA, MO, KS, and IL. We’ve worked on them all and I will say that FireLake products stand far above the rest in all categories, hands down.”,

it speaks solidly for your equipment design. The comment holds the highest value with Firelake as it came from a broad based company that is not a Firelake Distributor. Designing and building high quality waste oil heaters has been standard operation at Firelake over many, many years. We never get tired of hearing about the good our equipment has done for customers. Find out why our leading design in Horizon furnaces maintains a lead in the industry. See our CONTACT tab on the Firelake website. www.firelakeheaters.com

Firelake’s Announces Waste Oil Heater Sale of The Year

Sale: Firelake is offering their line of waste oil heaters and burners at discounted pricingthrough April 2012.   Remaining stock from the heating season is available at what should be the best pricing of 2012.   Firelake normally has better prices than
the competition, but no doubt exists with this sale.

sale on waste oil heatersCustomers have ordered many waste oil heaters thus far and dealers are making truck load purchases.   Garage owners, car dealerships, repair and maintenance facilities will see returns on investment that can not be ignored.

Covering four decades Firelake has designed the easiest to service burner and heat exchangers made.   The low cost for repair parts make the Firelake used oil burner systems the most desirable waste oil units available.  Our patented designs have been copied by many with out success.    Call or email Firelake for details at 866-252-3757 or Kevin Clemmer at kclemmer@firelakemfg.com

Tell us about your heater or crematorium !

We invite you to share your story about owning our heaters, boilers, or crematoriums.

Go to our contact page and send us comments telling us:

  • What model you have (crematorium, heater or boiler).
  • How long you have operated it.
  • How it has helped you with your business.
  • How it saves you money.

Also, if you are willing:

  • Your name
  • Location
  • Business name
  • Send us a picture or two if you can (of you and/or your equipment).

 

By sending information to us you agree that Firelake may

choose to post all or part of your information on our website or use it as a testimonial. You can find our contact page here.

New Animal Cremation Unit Meets NY Regulations

A new Model P16-SC30 cremation unit was installed last week south of Albany, New York. This model meets the newest NY Air Regulations. With a crane, a P16 can be installed in 1/2 a day and test fired within hours. The client (Valley Animal Hospital) will use this system to benefit pet owners in the surrounding area; animal cremation. Features of the P16 are temperature control and recording, extended flue gas retention time, and large load chamber with hinged balanced door. This P16 replaced a prior design Firelake model that served the facility for many

years. See the P16-SC30 specifications at

http://www.firelakeheaters.com/wp-content/uploads/2011/08/p16-sc30-lit.pdf

 

 

Firelake’s Popular New Fuel Meter Pump

A direct coupled metering system is now available for all heaters and hydronics up to 500,000 btu.    Unlike other pumps in the industry this drive uses motor technology that allows versatility and adaptability.    A Pennsylvania service manager commented, “I can see how this design is going to make Firelake pumps and heaters easier to service than other brands”.

Google+